WEIGHT SYSTEMS INC.

P.O. Box 1386
Laplace, Louisiana 70069

(2) Locations

jay@weightsystemsinc.com

504-782-9157
Mobile

985-652-2663
Phone & Fax

409-665-8050
Mobile

409-243-2781
Office & Fax

Common Features
(Except where noted, all fillers have these advantages.)

• Electronic models incorporate a "state of the art" GSE 662 programmable weight controller
• Electronic models use continuous self diagnostics for monitoring all aspects of the filling operation
• Auto tare feature zero's out the scale (fill is determined by net weight) regardless of drum weight
• Dribble-Max-Dribble fill: At the start of the fill the valve opens to the dribble position, and after a predetermined weight, the valve opens to Maximum flow. Then, when a predetermined weight is reached, the valve returns to the dribble position prior to a smooth final cut off.
• The lance lift/lower assembly utilizes a simple V track with rollers that is designed to operate indefinitely. A unique braking system on this assembly prevents the lance from retracting when the pneumatic piston is stopped in mid-stroke. On electronic models the lance position is determined by an encoder.
• Anti-collision feature: Returns lance to home position if the lance is not lined up with the bung hole
• For electronic subsurface models the lance rises during the fill and only as the weight increases. The lance position is maintained by weight and position encoding
• Set points and lance position memory recall: The system remembers the different lance position settings, set points, valve dribble position, and many other settings when recalled by product ID numbers - Can store over 1,000 set-ups by product ID numbers (Electronic models only)
• If the operator stops because of some mid-fill interruption, the fill can be resumed at a later time without interfering with the auto tare sequence (Electronic fillers only)
• Quick release detachable lance
• Operator selected automatic or manual mode
• Operator selected dribble flow rate
• Up to 100 psi product line pressure
• Two inch inlet and valving assures minimum pressure gradient (drum fillers)
• Electronic models feature an adjustable fume hood for handling 5 gal to 55 gal drums (Fixed hood on the 55000PS)
• Operator selected sub-surface filling (bottom-up, for foamy or vaporous liquids) or top filling (for viscous material and faster fill cycle)
• Fully adaptable to existing automated lines
• All wetted parts are stainless steel and Teflon (for options, see Options and Accessories)
• Fill determined by weight with tolerances to .01% of full scale capacity
• Heavy duty construction for long lasting service

Extended warranty on parts

Options & Accessories

• Electronic/digital or pneumatic control
• Digital or analog readout
• Type X Purge package for explosive products under electronic control
• Wetted parts of stainless steel, Teflon, PVC, Kynar or Hastelloy C-22
• Remote pump control (Start-stop or VFD)
• Heavy duty roller conveyor
• Stainless steel (corrosive products) or mild steel super structure
• Epoxy powder coating, polyethylene powder coating (corrosives) or polyurethane coating (solvents)

Lid clamping device for clamping plastic lids on 1 qt. to 7 gal containers

al@weightsystemsinc.com